<center><h2>Upgrade from Mono to MultiLeaf Suspension</h2><br><br>
</center>
<h3>
I wanted to remove the Monoleaf and Airshocks to make way for new Multileaf that can support the vehicle and allow me to run standard shocks for better handling and comfort.
After tons of research and trial and error I used the following:<br><br>
<br>
JRS 21-221 Springs - 3 Leaf - Ordered from JC Whitney ZX942079RF ($153)<br>
Monroe 5818 Sensatrac Shocks - Ordered from RockAuto ($50)<br>
Shackles with Poly Bushings (2) - Ordered from Espo.com<br>
Poly Fixed End Spring Bushings (4) - Ordered from Espo.com<br>
U Bolts (4) - Ordered from Espo.com<br>
Poly Axle Pads Lower - Ordered from Espo.com<br>
Total Espo Cost - $131.07 Shipped<br>
<br>Complete Project Cost - About $335<br>
<br><br>
</h3>
The new springs are 2.5" wide from end to end, where as the old springs were 2.75" wide at the bushings.<Br>
Because of this, ESPO offers different poly bushings that properly fit the 2.5" wide bushing ends<br>
Do not run stock bushings or Energy Suspension 3.2122 kit, they are for 2.75" wide Monoleaf!<br>
<br>
I used a 10 or 15% off coupon for JCWhitney when I ordered! http://www.edealinfo.com/Coupons/jcwhitney.shtml<br>